How to Revive a Lithium-Ion Battery: Step-by-Step Guide

Introduction

Lithium-ion batteries power all our modern gadgets, our phones, EVs, and energy storage. A Lot of times the battery fails or degrades due to various reasons. But don’t worry you can still fix lithium ion battery issues using the correct techniques. You don’t have to give up on the battery because reviving a lithium-ion battery is very safe and effective.

The methods and techniques we will discuss in this article are very detailed and will help you bring a dead lithium start battery back to working conditions by following the guide we will also explain when to give up and dispose of the faulty lithium ion battery.

Why Lithium-Ion Batteries Die

Lithium-ion batteries have a high energy density and are thus widely used. This can occur because of several other factors and so some small modification can help fixing lithium ion battery issues. Every battery has a fixed life, but we can still take measures to keep the battery working and revive a lithium ion battery. The only way of finding a solution is to understand the root cause of why Lithium batteries die.

There are several factors like overcharging, deep discharge, aging, physical damage, temperature extremes, and improper storage that can cause the lithium ion batteries to die. For instance, overcharging lithium ion battery cells puts stress on them. Deep discharges lower down the internal chemistry of the cell making it hard to fix lithium ion battery issues. With the increase in age, the capacity reduces gradually. Physical damage like swelling or leaks might reduce the lifespan of a lithium battery and takes it beyond repair. High temperatures accelerate the need for degradation whereas freezing temperatures might hamper functionality. Improper storage of lithium ion battery like long-term storage in full charge or exposing it to extreme temperatures killed its lifespan. Knowing and understanding these causes is important to safely revive lithium ion battery or consider techniques like rebuilding lithium battery packs whenever it’s necessary.

Safety Measures Before Attempting Battery Revival

Before attempting to revive a lithium-ion battery, you need to take safety measures. Lithium-ion batteries can cause risks like chemical leakage, fire, or even explosion if mishandled. Proper safety measures will protect you and ensure a safe revival process. These are a few safety tips and measures one should take before starting to revive a lithium ion battery:

● Use Proper Safety Gear

● Work in a Well-Ventilated Area

● Inspect the Battery Before Starting

● Keep a Fire Extinguisher Nearby

● Avoid Improper Handling

Methods And Techniques to Revive a Lithium-Ion Battery

There are several methods that can help to revive lithium ion battery cells. Each approach varies in complexity and effectiveness, so understanding the best method for your situation is important. Below are some of the most common techniques for reviving a lithium-ion battery.

Slow Charging Method

The slow charging method is by far the easiest and safest way to solve lithium battery problems. You have to use the same battery to apply only a low current for the slow charge. The slow charge method is a docile approach in which you gradually restore the battery’s functionality. This will not let the battery load much so that it might not get damaged beyond repair. If you have a Li-ion battery that has been deeply discharged, the battery can be charged slowly, and one can restore the charge to the battery.

To implement this method, you can connect a multi-meter between the battery and the charger. A slow current setting should be selected, and that is it. You can scale the amount of voltage that is getting raised in the multi-meter with time. If it starts to charge normally, you can leave it for a couple of hours together. This, in turn, will also help to recharge the Li-ion battery cells, which are weak as they cannot charge at the normal rate.

Parallel Charging

Parallel charging is the term which means the technique where a healthy fully charged lithium-ion battery is connected to a dead or below-discharged lithium-ion battery to boost up the charging. When two batteries are connected in parallel connection, both the lithium batteries have now shared the energy of each other. This is an effective method to recharge the lithium battery packs which are not charged completely but are not charging using their charging potential.

The necessary precautions to be taken while charging this method include being very cautious and using a voltmeter. Both batteries should have the same voltage and capacity, and one must monitor the process continuously. The most important point to be noted is, don’t leave it unattended as the battery may tend to overheat if successful, and it may lead to damage when the batteries used are of the wrong capacity. This is the professional method to parallel charge lithium-ion battery packs.

The Freezer Method

The freezer method is known to be a somewhat controversial method, but it can work well with some of the lithium-ion batteries, which have stopped charging because of internal chemical malfunction inside. The idea of this method is to put the battery inside a freezer for a few hours, so the internal chemicals of the battery get stabilized, which in response can jump-start the battery back to holding a charge again.

To use this method, firstly, seal the battery inside a plastic bag carefully to avoid any kind of moisture damage, and then place the battery inside the freezer for several hours. Then, remove the battery from the freezer let the battery reach room temperature, and then try charging it. While sometimes this process causes a layer of a frozen lithium-ion battery, it can also degrade the batteries. Always take precautions and only try this method with batteries that show no physical damage, including swelling or leakage.

Voltage Activation or Jump-starting

Another way to fix Lithium-ion battery cells is by voltage applying method to activate the battery. This step involves providing a small amount of voltage to the battery using an adjustable power supply. This is similar to the ‘jump-starting’ capability of batteries. This step is very helpful in the case where the battery has entirely stopped charging after the deep discharge of the battery and the battery is shown in the dead state.

To perform this, connect the power supply to the battery to provide the power to the battery and start to increase the voltage value. It is better to monitor the voltage using a multimeter regarding the voltage across the battery. If the battery tends to respond properly and has the charge stored in it, the battery can be provided as the input to the regular charger subsequently.

Although it is the fastest method to enable the battery by providing the voltage, an inadequate amount of voltage could not help to restart or activate a dead battery. So, surround this operation with proper caution, as a surplus amount of voltage could cause irreplaceable damage. The jump-starting lithium battery is one of the most preferable methods to enable the battery, but the application of this idea should be done carefully to avoid creating any kind of safety hazards.

Using a Battery Repair Device

A battery-repair device is a more sophisticated way of reviving a lithium-ion battery. They are designed to fix internal problems within the battery by recalibrating or reconditioning the cells. Generally, a controlled charge and discharge cycle is applied to the battery to increase its efficacy with these repair devices. A battery repair device can be found online and in any electric store. However, they can be quite expensive compared to the others, and you may not get your money’s worth if your battery is ultimately damaged.

When to Stop and Replace the Battery

A lithium-ion battery can often be restored and save some money, but there are times when reviving a lithium battery and its restoration can be dangerous. Knowing when a battery is NOT fixable and needs to be replaced will help prevent further damage to your device and protect you from injury. Swelling is one of the very first signs that a lithium-ion battery cannot be fixed. This swelling is a sure indication the battery has internal damage, such as too much gas or an overheating of the battery. If your battery is swollen, do not use it or charge it. Trying to repair a battery in this condition can cause it to break or even explode.

Leaking is another serious problem, as a lithium-ion battery that leaks typically indicates that the battery is dead. The leaking chemicals from a lithium battery can be very harmful to the environment, and can also be toxic to your body. Dead or dying batteries are a significant safety hazard and should be disposed of properly. There are some techniques you can try to rebuild a lithium battery pack. Still, if a lithium-ion battery doesn’t hold a charge long enough to be useful, you will need to replace the entire battery. The device a lithium battery powers may also suffer damage from a leaking battery and need to be replaced as well.

Conclusion

In this article, we explained how to revive lithium-ion batteries. These batteries are used in every electronic device now, but people often do not know how to extend their life. After reading this article, you might have gotten the answer you were looking for. We first talked about why lithium-ion batteries fail and then we discussed how we can revive a lithium ion battery and what safety measures to consider while reviving a battery, hope this article can help you understand better about this issue.

HOBWA is the leading lithium battery manufacturer in China, we produce 12V 24V lifepo4 batteries, home lithium storage batteries, commercial energy storage lithium batteries, and industrial power storage battery containers for a wide range of applications. In the great journey of the world’s striving towards carbon peaking and the construction of a sound carbon cycle, we sincerely invite every like-minded person to join us. Whether as a partner to jointly explore the market or to work together in technological research and development and exchanges, let’s contribute our strength to the early achievement of the world’s carbon peaking goal and the stable construction of the carbon cycle system.

FAQs About Reviving Lithium-Ion Batteries

Can a dead lithium-ion battery be restored?

Sometimes yes, dead lithium-ion batteries can be revived. It depends on the cause (of battery failure). If the battery is not physically damaged, or not moisture infected, and hasn’t aged excessively, The lithium-ion battery can be restored using several techniques like slow charging, parallel charging, using a battery repair device et cetera. If the battery has swollen, leaked, or is not charging even after you have tried to fix the lithium-ion battery, then consider replacing it.

Is the freezer method safe?

The freezer method is a controversial method and for many experts it is not considered a safe or reliable way to revive lithium battery cells. The philosophy behind the freezing method is that by freezing the battery, the internal chemicals of the battery get stable to some extent charging the battery. But, there are conditions to be followed to apply this technique. An unaware may cause more damage to the battery or may lead the battery to leak. The battery should be entirely dried and closed before it gets into the ice bucket.

How long should I try reviving a battery before giving up?

If, after several attempts, you have not been able to revive a dead lithium-ion battery, it might be time to twirl it into a professional to repair the lithium-ion battery safely. Do not constantly try to revive a failing battery. If you find it dangerous and signs of failure are still on, it is better to stop. Have a look at the battery before you start trying.” In case of any physical damage to the battery, it is better to stop using it and dispose of it.