Commercial Battery Storage 100KW 215kWh
Model: XPI-100kW215kWHh
Cycle Life: More than 6000 times (@25℃ 80% DOD)
LFP Battery: 215kWh
Maximum Efficiency: ≥99.5%
Warranty: 5 years, 10 years(Customization)
Cooling Way: Air cooling
Installation: outdoor
Protection: IP54
Place of origin: China
Description
Air Cooling Commercial Solar Battery Storage
The 100 kilowatt outdoor integrated commercial energy storage cabinet adopts an integrated design, integrating 215kWh high-voltage lithium batteries, battery management systems(BMS), 100KW energy storage power conversion systems(PCS), fire protection systems, air cooling systems, and energy management systems(EMS), monitoring and communication tools into one unit. The commercial battery storage is suitable for multiple application scenarios.
Application Scenarios
- Villa
- Hotel
- Hospitals
- Schools
- Data Centers
- Industrial Park
- Remote Island
- Charging Stations
For industrial end users, this commercial solar battery storage can perform peak-valley regulation, which can alleviate the burden on transformers during peak electricity consumption periods in summer. In addition, you can earn some revenue by utilizing the peak-valley electricity price difference. For end users with important loads, this commercial solar battery storage can be used as a backup power supply to ensure the continuity of power supply for important loads.
Working Conditions
The commercial battery storage cabinet adopts IP54 cabinet protection system, which can prevent dust, rain, and sand. Combined with the air cooling system, it optimizes the heat dissipation channel and can work normally in extreme weather conditions, from minus 20 degrees to 60 degrees.
Support Parallel Connection
The energy storage battery maximizes the storage capacity of 215kWh and supports up to 3 units in parallel, configuration is flexible and can be switched to on grid, and off grid working modes.
Intelligent Management(EMS)
The commercial battery storage system has an intelligent platform interface, which displays the overview data, device topology, cumulative charge and discharge statistics, real-time running curve, alarm information, and environmental control data of the energy storage cabinet.
Services We Support
Technical Data
- DATA
Model number | XPI-100kW215kWh |
Ac parameters | |
Rated AC power | 100kVA |
Wiring method | Three phase three wire |
Ac overload capability | 100kVA |
Allowed grid voltage | 380/400 (-15% to 10%) Vac |
Grid frequency allowed | 50/60 (-2.5 to 2.5) Hz |
Total current harmonic distortion rate | 3% or less |
Power factor | 0.99 ~ 1 / – 1 |
Battery side parameters (adjustable) | |
Cell type | LFP 280Ah |
Battery System Configuration | 1P240S |
Rated voltage | 768V |
Battery voltage range | 600~876V |
Electricity Charge | 215kWh |
PV parameters | |
Rated input power | 100kW |
Maximum input voltage | 600V |
MPPT voltage range | 250~600V |
Maximum efficiency | ≥99.5% |
MPPT quantity | 2 way |
System parameters | |
Noise | < 70dB |
Level of protection | IP54 |
Allowable ambient temperature | – 20 ~ 60 ℃ |
Cooling method | Air cooling |
Relative humidity allowed | 0 to 95% (no condensation) |
Cabinet dimensions (W x H x D) | 1539*2306*1500mm |
Allowable elevation | 3000m (greater than 3000m derated) |
Cabinet weight | 3t |
Maximum system efficiency | 90% |
Communication parameters | |
External communication interface | RS 485, Ethernet, CAN |
External communication protocol | Modbus TCP/RTU, CAN2.0 |
Features
HBOWA Energy Storage System
- Certifications